Igientruck

Vehicle Sanitization System

Vehicle sanitization, has recently taken on particular interest due the situation related to the COVID emergency and other major pandemics. Actually, beyond pandemics, this is always a very important and often underestimated aspect.
VEMA has been for over 40 years leader in environmental cleaning, always careful to develop and implement new solutions, is pleased to present the new automatic system for disinfection of vehicles IGIENTRUCK.

The sanitization process is entrusted to two photocells, positioned at the entrance to the platform, who when they glimpse the vehicle shape, they start the stainless steel pumping unit and the electronic dispenser pump, which through the AISI/304 STAINLESS STEEL tube bar rods equipped with special
dispensing nozzles with a very easy-to-maintain ceramic insert that will spray the medium both underneath and along the side bundles.

The additional two photocells, installed at the end of the system, are responsible for stopping the process, when the vehicle passed, avoiding wastage of product.
The delivery of water occurs with a pressure of 10 bar and the total flow of all the nozzles  installed is around 18 lt/min.
This is an important data; dispensing 0.5% disinfectant solution consumes 90 gr of product/minute with significant savings comparing similar systems with higher consumption and operating costs.

The construction of the platform will be the responsibility of the customer and should measure  3,60 x 4 meters (length x width). This helps to significantly reduce construction costs, as well  as to obtain a technically important and elegant area at the same time, provided with 4 drain  channels with grills (supplied by us), to be placed horizontally according to the project data.
The electrical part consisting of 24V low voltage elements, is managed by a Mini PLC which handles all process, alarms “runway” included, free/busy, and runtime indicator LEDs are customizable as needed together with the antifreeze function (including thermal sensing probe) that below 2°C will open the air solenoid valve, half compressor (al) ensuring complete system discharge in frost-prone areas.

Igientruck

Vehicle Sanitization System

Vehicle sanitization, has recently taken on particular interest due the situation related to the COVID emergency and other major pandemics. Actually, beyond pandemics, this is always a very important and often underestimated aspect.
VEMA has been for over 40 years leader in environmental cleaning, always careful to develop and implement new solutions, is pleased to present the new automatic system for disinfection of vehicles IGIENTRUCK.

The sanitization process is entrusted to two photocells, positioned at the entrance to the platform, who when they glimpse the vehicle shape, they start the stainless steel pumping unit and the electronic dispenser pump, which through the AISI/304 STAINLESS STEEL tube bar rods equipped with special
dispensing nozzles with a very easy-to-maintain ceramic insert that will spray the medium both underneath and along the side bundles.

The additional two photocells, installed at the end of the system, are responsible for stopping the process, when the vehicle passed, avoiding wastage of product.
The delivery of water occurs with a pressure of 10 bar and the total flow of all the nozzles  installed is around 18 lt/min.
This is an important data; dispensing 0.5% disinfectant solution consumes 90 gr of product/minute with significant savings comparing similar systems with higher consumption and operating costs.

The construction of the platform will be the responsibility of the customer and should measure  3,60 x 4 meters (length x width). This helps to significantly reduce construction costs, as well  as to obtain a technically important and elegant area at the same time, provided with 4 drain  channels with grills (supplied by us), to be placed horizontally according to the project data.
The electrical part consisting of 24V low voltage elements, is managed by a Mini PLC which handles all process, alarms “runway” included, free/busy, and runtime indicator LEDs are customizable as needed together with the antifreeze function (including thermal sensing probe) that below 2°C will open the air solenoid valve, half compressor (al) ensuring complete system discharge in frost-prone areas.