Foam & Wash B.P.

Low pressure foam dispenser station From 2 to 8 Bar Compressed air from 3 to 10 Bar max

F&W B.P. is a small high performance foam dispenser. 
F&W B.P. uses just mains water and compressed air. 
It generates a very dense clinging foam, making it ideal for cleaning vertical surfaces and ceilings, with low detergent consumption
Thanks to the complete absence of vaporisation, it can also be used in complete safety with very alkaline detergent foam. 

  • Foaming: Minimum 2 Bars in absolute safety without vaporisation; 
  • Rinsing: With 3 Bars of pressure, water consumption about 35 lt/min;
  • Water: From 2 to 8 Bars (normally mains pressure is between 2 and 4 bars); 
  • Air: From 3 to 10 Bars (the foam becomes denser as air pressure increases); 
  • Water flow: 250 I/h (mean value); 
  • Working temperature: With detergent foam, use of water at room temperature is recommended. However, water at a temperature of not more than 50°C can be used; 
  • Surface treated: About 25 m² per minute; 
  • Dimensions: 195x185x55 mm (L x H x P); 
  • Weight box: 4.5Kg; 
  • Material box: Stainless steel AISI/304; 
  • Venturi System: Stainless steel AlS1/316; 
  • Product aspirated: From 0,1% to 10%;
  • Backflow valve;
  • Use mains water only.

 

 

Foam & Wash B.P.

Low pressure foam dispenser station From 2 to 8 Bar Compressed air from 3 to 10 Bar max

F&W B.P. is a small high performance foam dispenser. 
F&W B.P. uses just mains water and compressed air. 
It generates a very dense clinging foam, making it ideal for cleaning vertical surfaces and ceilings, with low detergent consumption
Thanks to the complete absence of vaporisation, it can also be used in complete safety with very alkaline detergent foam. 

  • Foaming: Minimum 2 Bars in absolute safety without vaporisation; 
  • Rinsing: With 3 Bars of pressure, water consumption about 35 lt/min;
  • Water: From 2 to 8 Bars (normally mains pressure is between 2 and 4 bars); 
  • Air: From 3 to 10 Bars (the foam becomes denser as air pressure increases); 
  • Water flow: 250 I/h (mean value); 
  • Working temperature: With detergent foam, use of water at room temperature is recommended. However, water at a temperature of not more than 50°C can be used; 
  • Surface treated: About 25 m² per minute; 
  • Dimensions: 195x185x55 mm (L x H x P); 
  • Weight box: 4.5Kg; 
  • Material box: Stainless steel AISI/304; 
  • Venturi System: Stainless steel AlS1/316; 
  • Product aspirated: From 0,1% to 10%;
  • Backflow valve;
  • Use mains water only.